S&S starts a trial with Essity in Nokia for a new application of their technology by Aida Vila | Dec 18, 2019 | NewsThis December, it has been installed a Jet Blower JB30 XL in one flotation cell of the DIP plant in Nokia site. The installation of this one unit of Jet Blower is in substitution of almost 30 nozzles. The trial is to prove that a Jet Blower can provide the same or...
S&S successfully starts up 1st phase of rebuilt aeration system at Essity Prudhoe by Aida Vila | Sep 30, 2019 | NewsThis summer, S&S has been working on the 1st phase of the upgrade of the aeration system of the annular aerated biological reactor at Essity’s Prudhoe site. This 1st phase includes the installation of 22 Jet Blower and 10 of the 11 pumps of the total project. The...
S&S chosen to rebuild the aeration system at Essity Cuijk’s WWTP by Aida Vila | Jun 4, 2019 | NewsEssity Cuijk has selected S&S to update the aeration system on their aerated basin on the WWTP. S&S will supply 5 Jet Blowers of JB26 model, with an air introduction capacity of 250 Nm3/h at 3.5 bar of working pressure. The scope supply also includes the pump...
Project to replace the aeration system of a biological reactor in Essity Cuijk by Aida Vila | Mar 29, 2019 | NewsS&S has submitted a proposal to improve the oxygenation system of the aerobic reactor of Essity’s factory in Cuijk, the Netherlands. After several studies and laboratory tests at S&S pilot plant in Tarragona, the proposal solves the problems of this...
Two Air Solvers installed in Greenpaper, former Propasa, Mexico by Aida Vila | Mar 4, 2019 | NewsThe Greenpaper factory in Nuevo León continues with their change to Air Solver units to replace the traditional aeration system of their DAFs. On this occasion, two MJ26 Air Solvers will be installed in two of the plant DAFs, one Air Solver in each dissolved air...
S&S chosen to rebuild the aeration system at Essity Prudhoe’s WWTP by Aida Vila | Feb 11, 2019 | NewsEssity Prudhoe has selected S&S for the upgrade of the aeration system on their wastewater treatment plant. The WWTP receives water from the paper machines, but also from the deinking plant. S&S will supply the Jet Blowers of the JB30 XL model, with an air...
Project for the conveyance of a contaminated air fluid to a washing tank by Manel Sanchez | Feb 8, 2019 | NewsS&S is part of the project to channel a flow of polluted air to a washing tank located about 10 meters away, in the same treatment plant, from a waste management plant. The installation consists of two Jet Blower units model JB 30 XL, with the intention of...
Installation of two Air Solvers in DIP2 clarifiers of Papresa by Manel Sanchez | Jan 15, 2019 | NewsS&S has installed in Papresa, Renteria (Spain), two Air Solvers of their model MJ16, one in each DAF clarifier of DIP2. The new installation has replaced two pumps of 32 kW, from the traditional aeration system, for two pumps of 4 kW eack. Therefore, the energy...
S&S starts up three Jet Blowers in Iberboard Mill by Manel Sanchez | Oct 29, 2018 | NewsThis October a system of three Jet Blowers was installed in the paper mill to aerate and homogenize three process water tanks. With the aeration of the waters, a serious problem of odors has been solved associated to a potential of oxidation-reduction of the waters...
The first Air Solver is installed in the Kartogroup group by Manel Sanchez | Feb 26, 2018 | NewsThis February has been the start-up of the Air Solver installed in the Kartogroup factory in Burriana (Spain). It is the first Air Solver installed in one of the factories of the mentioned group, but the installation of another Air Solver in the second DAF of...